Kontakt os
+45 42466800 |
| Send en mail
Special Blander
Rotorudtræk
Vores udvalg af laboratorieblandere.
Fås som standard og atex
Mulighed for at flere produktindløb
Ideal for the development of products and processes
• Mixing of powders / granules / flakes / fibers / pastes
• Wetting of solids with one or more liquids
• Granulation by injecting a binding liquid
• Film coating by injecting a liquid on a powder and then adding a second powder
• Heating /cooling / temperature keeping
• Drying with final mosture content <0,1% in Full Vacuum
Main features
• Short mixing time
• Extremely high mixing quality
• Batches with repeatable and scalable results
• Mixing ratio 1/100.000
• Coefficient of variation (CV): ≤ 3 %
• Low maintenance
• Functional design for installation in R&D area
Techanical features
• Batch size: 1,4 / 3 / 7 / 20 liters (net)
• Cylindrical mixing chamber
• MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design
• Material of costruction: AISI 304 / AISI 316 / AISI 316Ti
• Discharge door with round profile, building the bottom side of the mixing chamber
• Front side inspection door complete with safety electric lock
• Electric control panel with inverter for speed variation of the main rotor shaft
• Internal finishing with roughness Ra 0.5-0.8 µm
Options
• Declaration of conformity for contact with food according to regulations 1935/2004 EC and 2023/2006 EC
• Declaration of conformity Atex II 1/3D Ex h IIIB T135°C Da/Dc (Inside Zone 20, Outside Zona 22)
• Wolfram carboide coating on mixing tools
• Liquid injection system
• Side mounted high speed choppers / Homogenizers
• Heat exchanger on mixing chamber for heating / cooling processes
• Construction for Full Vacuum application
• Construction for pressure application
• Declaration of conformity PED 2014/68/UE
• Different finishes of parts in contact with product available on request.
Rotorudtræk
Reaktor/Dryer
Reaktor/Dryer
- Blandere fås fra 65 liter til 28.000 liter i arbejdskapacitet.
- Fås i ATEX version.
- Mulighed for at flere produktindløb.
Suitable for the following production processes:
• Chemical reactions of several solid products with the possibility of liquid injection
• Exothermic reactions
• Drying with final moisture content <0.1%
Main features
• Management of the process time and temperature through the heat exchanger
• Short mixing time
• Extremely high mixing quality
• Batches with repeatable results
• Mixing ratio 1/100.000
• Coefficient of variation (CV): ≤ 3 %
• Low maintenance
Techanical features
• Batch size: from 65 to 28.000 liters (net)
• Cylindrical mixing chamber
• MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design
• Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti
• Inspection door complete with safety electric lock
• Discharge door with round profile, building the bottom side of the mixing chamber
• Rotor shaft with turned and coaxial ends
• Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen
• Heat exchanger on mixing chamber for heating / cooling processes
Options
• Construction for Full Vacuum application
• Construction for pressure application
• Declaration of conformity PED 2014/68/UE
• Declaration of conformity for contact with food according to regulations 1935/2004 EC and 2023/2006 EC
• Declaration of conformity Atex II 1/3D Ex h IIIB T135°C Da/Dc (Inside Zone 20, Outside Zona 22)
• Wolfram carboide coating on mixing tools
• Liquid injection system
• Side mounted high speed choppers / Homogenizers
• Pneumatic sampler
• Pneumatic panel
• Different finishes of parts in contact with product available on reques
Laboratorie
• Batch size: 1,4 / 3 / 7 / 20 liters (net)
• Functional design for installation in R&D area
Ideal for the development of products and processes
• Mixing of powders / granules / flakes / fibers / pastes
• Wetting of solids with one or more liquids
• Granulation by injecting a binding liquid
• Film coating by injecting a liquid on a powder and then adding a second powder
• Heating /cooling / temperature keeping
• Drying with final mosture content <0,1% in Full Vacuum
Main features
• Short mixing time
• Extremely high mixing quality
• Batches with repeatable and scalable results
• Mixing ratio 1/100.000
• Coefficient of variation (CV): ≤ 3 %
• Low maintenance
• Functional design for installation in R&D area
Techanical features
• Batch size: 1,4 / 3 / 7 / 20 liters (net)
• Cylindrical mixing chamber
• MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design
• Material of costruction: AISI 304 / AISI 316 / AISI 316Ti
• Discharge door with round profile, building the bottom side of the mixing chamber
• Front side inspection door complete with safety electric lock
• Electric control panel with inverter for speed variation of the main rotor shaft
• Internal finishing with roughness Ra 0.5-0.8 µm
Options
• Declaration of conformity for contact with food according to regulations 1935/2004 EC and 2023/2006 EC
• Declaration of conformity Atex II 1/3D Ex h IIIB T135°C Da/Dc (Inside Zone 20, Outside Zona 22)
• Wolfram carboide coating on mixing tools
• Liquid injection system
• Side mounted high speed choppers / Homogenizers
• Heat exchanger on mixing chamber for heating / cooling processes
• Construction for Full Vacuum application
• Construction for pressure application
• Declaration of conformity PED 2014/68/UE
• Different finishes of parts in contact with product available on request.
Teknisk datablad
| Arbejdskapacitet | ||||||||
| STD | ATEX | TYPE | A | B | C | KG | MIN | MAX. |
| N- | A- | MXC0002 | 1000 | 600 | 1350 | 170 | 0,7 | 1,4 |
| N- | A- | MXC0005 | 1000 | 600 | 1370 | 180 | 1,5 | 3 |
| N- | A- | MXC0012 | 1020 | 650 | 1450 | 270 | 3,5 | 7 |
| N- | A- | MXC0030 | 1120 | 700 | 1520 | 320 | 10 | 20 |
Laboratorie
