Kontakt os

| t. +45 42466800

| m. Send en mail

11 + 8 =

Cellesluser

VSD

VSDT

VSF

VSFT

VSFC

VSD | Drop through rotary valve  

COMAV’S DROP THROUGH ROTARY VALVES are designed to handle pneumatic conveying in dilute and dense phase for every industrial application such as food, plastic, rubber, chemical, pharmaceutical and mining. Thanks to COMAV’S TECHNOLOGY our valve is used for powder, granulate, flakes, pellets assuring a perfect reliability and meeting a wide range of customer’s requirements. The square flange and a special misalignment allows a complete cell discharge without any breakage of the product.

APPLICATIONS

Metering
Discharge
powder
Granulate
General pneumatic conveying

FEATRURES

PRESSURE: 1,5 bar
TEMP.: max 65°C
AIR LEAKAGE: See chart
INTEGRATED CASTING
INNER HOPPER (Better filling efficiency)
8 Vanes open or closed ends rotor

DESIGN

FLANGING: Square
SIZE: 200, 250, 320, 400, 480

HOUSING: Cast iron casting, stainless steel AISI 316L casting
ROTOR: Welded carbon steel or stainless steel AISI 304, AISI 316L

DRIVE: Direct drive as standard or chain transmission available in bare shaft version. all our drives can be controlled by inverter
ROBUST & COMPACT DESIGN: with minimal rotor tolerance

 

OPTIONALS

Actuator on cover side

Nickel coating ec1935/2004

Special execution for abrasive product

Special pipe on request
for special application

Special execution for direct fitting at piping

High temperature version

Adaptor kit

         JN Engineering Atex certificering

 Download VSD Brochure

Teknisk Data | VDS med motor

A B V D E F G L/Rev. Rev.1′ max POWER WEIGHT
200 350 130 480 320 190 380 570 4,5 30 Kw 0.55 80 kg
250 350 160 510 380 205 395 600 8 30 Kw 0,55 106 kg
320 380 195 575 450 221 421 642 16 30 Kw 1.10 176 kg
400 400 240 640 570 280 482 762 37 30 Kw 1.50 282 kg
480 430 305 735 660 315 517 832 65 30 Kw 2.20 538 kg

NB. scroll horisontalt for fuld tabeloversigt.

Teknisk Data | – –

A B C D E F G H I J K L M
200 320 190 267 ø30 47 130 132,5 20 200 140 285 225 3
250 380 205 282 ø30 47 160 157,5 25 230 160 335 265 3
320 450 221 304 ø35 53 195 192,5 40 260 200 365 305 3
400 570 280 368 ø40 56 240 237,5 55 370 260 475 365 4
480 660 315 405 ø52 65 305 282,5 70 444 300 570 425 4

NB. scroll horisontalt for fuld tabeloversigt.

N O P Q R S T U L.Rev. WEIGHT GG
200 86 2 99 ø12 115 1 210 M10 4,5 64 kg 1/8″ gas
250 101 2 117 ø14 125 2 117,5 M10 8 90 kg 1/8″ gas
320 111 2 136 ø14 175 2 132,5 M10 16 147 kg 1/8″ gas
400 110 2 165 ø14 220 3 125 M10 37 260 kg 1/4″ gas
480 132 2 191 ø18 220 3 150 M10 65 492 kg 1/4″ gas

NB. scroll horisontalt for fuld tabeloversigt.

VSDT | Drop through rotary valve  

COMAV’S DROP THROUGH ROTARY VALVES are designed to handle pneumatic conveying in dilute phase for every industrial application such as food, plastic, rubber, chemical, pharmaceutical and mining.

Thanks to COMAV’S TECHNOLOGY, our valves are used for powder, granulate, pellets assuring a perfect reliability an meeting a wide range of customer’s requirements.

The round flange allows an easy connection with line/equipment.

APPLICATIONS

Metering
Discharge
powder
Granulate
General pneumatic conveying

FEATRURES

PRESSURE: 1,5 bar
TEMP.: max 65°C
AIR LEAKAGE: See chart
INTEGRATED CASTING
INNER HOPPER (Better filling efficiency)
8 Vanes open or closed ends rotor

DESIGN

FLANGING: Round uni PN 10
SIZE: DN200, DN250

HOUSING: Cast iron casting
ROTOR: Welded carbon steel or stainless steel AISI 304, AISI 316L

DRIVE: Direct drive or chain transmission available in bare shaft version.
All our drives can be controlled by inverter
ROBUST & COMPACT DESIGN: wWith minimal rotor tolerance

 

OPTIONALS

Different rotors for different products
Nickel coating

Nickel coating food grade
Hard chromium plating
Various polishing degrees
Food gasket
High temperature configuration
Feeding shoe
Feeding hopper complete with air intakes
Air blow-in purge

Air intakes holes on housing
Speed controller

         JN Engineering Atex certificering

 Download VSDT Brochure

Teknisk Data | VSDT med motor

A B C D E F G H L.Rev. Rev./1″ max POWER WEIGHT
150 412 ø250 260 158 325 483 482 31 2,2 30 Kw 0,18 60 kg
200 400 ø340 340 195 385 580 180 75 4,5 30 Kw 0,55 95 kg
250 400 ø395 400 210 400 610 150 75 8 30 Kw 0,75 115 kg
300 450 ø445 500 225 420 645 180 87 16 30 Kw 1,10 176 kg

NB. scroll horisontalt for fuld tabeloversigt.

Teknisk Data | VSDT

ø350ø326221 

A B C D E F F1 G H I J K L M L./Rev. N
150 260 152 235 ø25 70 ø135 ø135 ø210 ø250 8xM16 1 165 110 4xM10 2,2 1/8″ gas
200 340 190 267 ø30 47 ø200 ø200 ø295 ø340 8xM22 1 210 115 4xM10 4,5 1/8″ gas
250 400 205 282 ø30 47 ø265 ø265 ø350 ø395 12xM22 2 117,5 125 6xM10 8 1/8″ gas
300 500 221 304 ø35 53 ø326 ø326 ø400 ø445 12xM22 2 132,5 175 6xM10 16 1/8″ gas

NB. scroll horisontalt for fuld tabeloversigt.

VSF | Blow through rotary valve

COMAV’S BLOW THROUGH ROTARY VALVES are designed to handle pneumatic conveying in dilute and dense phase for every industrial application such as food, plastic, rubber, chemical, pharmaceutical and mining.

Thanks to COMAV’S TECHNOLOGY, our vales are used for powder and fine products assuring a perfect reliability and meeting a wide range of customer’s requirements. The square flange and a special disalignment allows a complete cell discharge without any breakage of the product.

APPLICATIONS

Powder
Fine products
Vacuum conveying
Pneumatic conveying

FEATRURES

PRESSURE: 1,5 bar
TEMP.: max 65°C
AIR LEAKAGE: See chart in brochure
INTEGRATED CASTING
INNER HOPPER (Better filling efficiency)
8 vanes open ends rotor

DESIGN

FLANGING: Square
SIZE: 200, 250, 320, 400, 480

HOUSING: Cast iron casting, stainless steel AISI 304, AISI 316L
ROTOR: Welded carbon steel or stainless steel AISI 304, AISI 316L

DRIVE: Chain transmission as standard or direct drive.
Available in bare shaft version.
All our drives can be controlled by inventer.
ROBUST & COMPACT DESIGN: With minimal rotor tolerance

 

OPTIONALS

Different rotors for different products
Nickel coating

Nickel coating food grade
Hard chromium plating
Various polishing degrees
Food grade gasket
High temperature configuration
Feeding hopper complete with air intakes
Air blow-in purge

Air intakes holes on housing
Speed controller
Speeder control

         JN Engineering Atex certificering

 Download VSDT Brochure

Teknisk Data | VSF med motor

A B C D E F G L.Rev. Rev./1′ max POWER WEIGHT
200 360 132,5 492,5 320 235 280 515 4,5 30 0,37 Kw 90 kg
250 410 157,5 567,5 380 255 295 550 8 30 0,55 Kw 127 kg
320 455 192,5 647,5 450 274 321 595 16 30 0,75 Kw 196 kg
400 555 237,5 792,5 570 285 380 665 37 30 1,10 Kw 345 kg
480 635 282,5 917,5 660 255 425 680 65 30 1,50 Kw 585 kg

NB. scroll horisontalt for fuld tabeloversigt.

Teknisk Data | VSF

A B C D E F G H I J K L M N O P
200 320 190 267 ø30 47 130 132,5 20 200 140 285 225 3 86 2 99
250 380 205 282 ø30 47 160 157,5 25 230 160 335 265 3 101 2 117
320 450 221 304 ø35 53 195 192,5 40 260 200 365 305 3 111 2 136
400 570 280 368 ø40 56 240 237,5 55 370 260 475 365 4 110 2 165
480 660 315 405 ø52 65 305 282,5 70 444 300 570 425 4 132 2 191

NB. scroll horisontalt for fuld tabeloversigt.

Q R S T U V W X Y Z X1 X2 L.Rev. WEIGHT GG
200 ø12 115 1 210 M10 70 380 ø60 100 M10 ø90 ø110 4,5 68 kg 1/8″ gas
250 ø 125 2 117,5 M10 85 410 ø77 117 M10 ø110 ø130 8 98 kg 1/8″ gas
320 ø 175 2 132,5 M10 100 442 ø99 148 M10 ø140 ø160 16 160 kg 1/8″ gas
400 ø 220 3 125 M10 131 560 ø129 189 M12 ø170 ø200 37 285 kg 1/4″ gas
480 ø 220 3 150 M10 147,5 630 ø156 108 M14 ø210 ø240 65 510 kg 1/4″ gas

NB. scroll horisontalt for fuld tabeloversigt.

VSFT | Blow through rotary valve

COMAV’S BLOW THROUGH ROTARY VALVES are designed to handle pneumatic conveying in dilute and dense phase for every industrial application such as food, plastic, rubber, chemical, pharmaceutical and mining.

Thanks to COMAV’S TECHNOLOGY, our valves are used for powder and fine products assuring a perfect reliability and meeting a wide range of customer’s requirements. The round flange allows an easy connection with line/equipment .

APPLICATIONS

Powder
Fine products
Vacuum conveying
Pneumatic conveying

FEATRURES

PRESSURE: 1,5 bar
TEMP.: max 65°C
AIR LEAKAGE: See chart in brochure
INTEGRATED CASTING
INNER HOPPER (Better filling efficiency)
8 vanes open ends rotor

DESIGN

FLANGING: Round uni PN 10
SIZE: 200, 250, 320, 400, 480

HOUSING: Cast iron casting
ROTOR: Welded carbon steel or stainless steel AISI 304, AISI 316L

DRIVE: Chain transmission as standard or direct drive.
Available in bare shaft version.
All our drives can be controlled by inventer.
ROBUST & COMPACT DESIGN: With minimal rotor tolerance

OPTIONALS

Different rotors for different products
Nickel coating

Nickel coating food grade
Hard chromium plating
Various polishing degrees
Food grade gasket
High temperature configuration
Feeding hopper complete with air intakes
Air blow-in purge

Air intakes holes on housing
Speed display
Speeder controller

          JN Engineering Atex certificering

 Download VSFT Brochure

Teknisk Data | VSFT med motor

A B C D E F G L.Rev. Rev./1′ max POWER WEIGHT
200 360 ø340 340 250 280 530 515 4,5 30 0,55 Kw 110 kg
250 410 ø395 400 255 295 550 550 8 30 0,75 Kw 130 kg

NB. scroll horisontalt for fuld tabeloversigt.

Teknisk Data | VSFT

  A B C D E F F1 G H I J K
150 260 152 253 ø25 70 ø135 ø135 ø210 ø250 8xM16 1 165
200 340 190 267 ø35 47 ø200 ø200 ø295 ø340 8xM22 1 210
250 400 205 282 ø35 47 ø265 ø265 ø350 ø395 12xM22 2 117,5
300 500 221 304 ø35 53 ø326 ø326 ø400 ø445 12xM22 2 132,5

NB. scroll horisontalt for fuld tabeloversigt.

  L M O P Q R S T U L./Rev. N
150 110 4xM10 45 ø47 ø80 ø100 M8 42 50 2,2 1/8″ gas
200 115 4xM10 ø60 ø90 ø110 M10 55 55 4,5 1/8″ gas
250 125 6xM10 ø77 ø110 ø130 M10 65 65 8 1/8″ gas
300 175 6xM10 ø99 ø140 ø160 M10 80 80 16 1/8″ gas

NB. scroll horisontalt for fuld tabeloversigt.

VSFC | Blow through rotary valve

VSFC ROTARY VALVE  is designed to discharge containers holding powder and granulate.

Thanks to COMAV’S TECHNOLOGY VSFC can be used upon all hard application assuring an average discharge time of 50/60 minutes per 30” container.
The capacity of valve and its shape are in according to the main logistic companies’ needs.

APPLICATIONS

On chassis
General pneumatic conveying
Powder
Granulate

 

FEATRURES

PRESSURE: -0,5 bar, +2 bar
MAX PRESSURE FOR HYDRAULIC MOTOR: 70 bar

QUANTITY OR REQUET OIL: 50kg/min(in case of
hydraulic motor)

TEMPERATURE: max 65°C
ROTATION SPEED: 42rpm max
INTEGRATED CASTING
INNER HOPPER (Better filling efficiency)
OPEN ENDS ROTOR: Up to 10 vanes

DESIGN

FLANGING: Square
SIZE: 320

HOUSING: Cast iron casting, stainless steel AISI 316L casting
ROTOR: Welded carbon steel or stainless steel AISI 304, AISI 316L

DRIVE: Direct drive, chain transmission. Electric or hydraulic

motor available in bare shift version.
ROBUST & COMPACT DESIGN: With minimal rotor tolerance

 

OPTIONALS

Different rotors for different products
Nickel coating

Nickel coating food grade
Hard chromium plating
Various polishing degrees
Food grade gasket
High temperature configuration
Feeding hopper complete with air intakes
Air blow-in purge

Air intakes holes on housing
Speed display
Speeder controller

          JN Engineering Atex certificering

 Download VSFT Brochure

Teknisk Data | VSFC

  A B C D E F G H I J K L M N O P Q1 Q2 R S T U V W X X1 X2 Y1 Y2 Z L.Rev. WEIGHT GG
320 441 309 409 ø35 70 193 222,5 40 385 265 475 365 4 110 2 165 M12 ø14 130 91 164,5 M10 88 617 ø99 ø140 ø160 150 180 M10 29 170 kgh 1/8″ gas

NB. scroll horisontalt for fuld tabeloversigt.